 |
|||||||||||||||||||||
|
|
||||||||||||||||||||
 |
Install Injector by tapping the injector into the root well of the tree. Try to keep it 2 to 5 inches from the base so it is centrally located in the root well. For dry hardened ground: Consider soaking the immediate area for easier installation. |
||||||||||||||||||||
 |
|||||||||||||||||||||
|
|
Remove Injector Cap. Toss it into the reservoir to avoid losing it.
|
||||||||||||||||||||
 |
|||||||||||||||||||||
|
Attach Reservoir by lining up the mating parts and pressing down. Important Note: Be careful to line up mating parts. Misalignment can displace the grommet. |
|||||||||||||||||||||
 |
|||||||||||||||||||||
|
Fill Reservoir with water using a hose or any other source. If you are capturing rainwater, this is a great place to use it. |
|||||||||||||||||||||
 |
|||||||||||||||||||||
|
Optional: Additives If you are using soil amendments, soil penetration enhancers, or fertilizers, simply add the proper quantities to the water at this point. |
|||||||||||||||||||||
|
Optional: Remove Reservoir The reservoirs are easy to remove if desired, but for quicker watering week after week, leave the reservoirs attached.
|
|
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
Optional: Replace Cap If you are removing the reservoirs, be sure to replace the cap to keep clogging debris from entering the injector. |
|||||||||||||||||||||
|
Install Around Drip Line As trees grow larger, so does the root well. If watering and/or feeding is still necessary, it should be moved out to the drip line to promote stabilizing outward growth. Equally space at least 3 units just inside the spread of the tree top. Note that soak rates will be slower in this soil as it is more compact than the root well of a newly planted tree. |
 |
||||||||||||||||||||
|
Plug-Fill-Tote For trees that cannot be reached with a garden hose, Tree I.V. has a solution that isn't possible with any other watering product. Simply plug the hole with our standard Reservoir Plug, fill the reservoir, and move it to the tree. The plug is designed to "pop out" as you attach the reservoir to the injector, and watering begins instantly. You might also consider the optional Reservoir Lid we offer, so water doesn't splash out during transport. Important Note: Be careful to line up mating parts when installing the reservoir. Misalignment can displace the grommet. |
|
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
20079 Ford Road, Cherryvale, KS, 67335, US Phone: (620) 328-3473 Email: support@sayegrow.com Copyright 2006 SayeGrow LLC. All rights reserved. |
|||||||||||||||||||||
